|Dimensions||6 x 5 x .5 in|
The Kanga / m0xpd Arduino Rx Shield is a simple Direct Conversion receiver sub-system for the HF bands. It is offered as an Arduino “shield”, allowing a complete receiver to be assembled from an Arduino single board computer (UNO or MEGA).
With an appropriate RF generator (such as the Kanga / m0xpd DDS Shield or the Kanga / m0xpd Si5351 Shield). Or even the “Kanga / m0xpd Tx Shield” can also be added to form a complete CW Transceiver. The Rx shield will operate on any HF band – the band is selected by an external band-pass filter on the input (NOT SUPPLIED).
The Rx shield may also be used as the foundation of a conventional receiver, independent of an Arduino or any such digital system, in which case only a VFO signal (plus band-pass filter) is required.
Example software (Arduino “sketches”), including code for the full CW transceiver, is available for download from the m0xpd blog.
Click here for the build instructions.
4 in stock